U0155 – Lost Communication With Instrument Panel Cluster (IPC) Control Module

What does U0155 mean?

A module has lost communication with the instrument panel cluster (IPC). Modern instrument clusters are networked modules that both display information and relay data, so losing communication with them affects more than just the gauges.

What causes U0155?

Listed from most to least common:

1. 1Damaged wiring to the cluster
2. 2Blown fuse
3. 3Loose or corroded connector behind the cluster
4. 4CAN bus fault
5. 5Low system voltage
6. 6Failed instrument cluster
7. 7Poor ground connection

Code breakdown

Common symptoms

• Gauges reading zero or behaving erratically
• Warning lights staying on or not illuminating at all
• Speedometer or tachometer not working
• Scan tool cannot communicate with the cluster
• Backlighting issues

How to diagnose

1. 1Check battery voltage and charging system health.
2. 2Check cluster fuses.
3. 3Inspect the connector behind the instrument cluster — these can work loose over time, especially after dash work.
4. 4Verify power and ground at the cluster.
5. 5Test CAN bus integrity.
6. 6Check whether other modules also report communication faults.

Gauges and warning lights may stop working or display incorrectly, which means you lose visibility into speed, fuel level, and genuine warnings. Drive cautiously until repaired.

Common fixes and estimated costs

Costs are rough US estimates including parts and labor. Actual pricing varies significantly by vehicle, region, and shop rates.

Good to know

If this code appeared shortly after dashboard, radio, or steering column work, a connector left partially seated is the most likely explanation. Check recent repairs before diagnosing deeper.

Related codes